Emergency measures when the machine jammed

Emergency measures when the machine jammed.
When our engine block "ceket / ngejim / loss" certainly there are scratches / marks / scratches on the block & piston area,
if your money is usually directly replace the piston and diover size, but what if the funds that we have the fit-fit?
then for certain conditions can be tricked.
Then what kind of condition can be tricked to budget repairs are too big?

1 If the beret on the block / pistons not until terggores too deep - max 0.5 mm for the piston diameter 50mm min

2 If the piston / block is not damaged by knocking

3 If the piston rings not to lock in the groove / gutter piston ring
How to outsmart?

1 do sanding on the block and piston area beret

2-way direction of sanding should cross from the piston motion
3 do the finishing with sandpaper 1000

This way your machine back safely to high rotation, but the effects are going to get rough voice.
and how to avoid severe ngejim?

1 when the motor driving with high engine speed if there is gejala2 ngelitik, or tiba2-powered engine did not immediately pull down your clutch for direct spin down, if at that time coupled with the demise of the engine but if we carry on condition he not die quietly certain time occurs because the piston & beret expanding bloc.

2 immediately pulled over, and enter the gear teeth to position 2 / 3 and then slowly backing up your motor pistons and the block is not locked.

3 drops of oil on the side of the piston through the spark plug hole if by chance we took,

4 wait until the engine cold and then run back slowly until your motor home

5.Steps repairs done immediately above.